Sensitivity of Peak Dynamic Responses to Input Factors
Responses have been calculated for the Zion Unit 1 plant, using the SSMRP computer code SMACS, as part of the seismic probabilistic risk assessment performed by the Seismic Safety Margins...
Coupled Vertical-Rocking Response of Base-Isolated Structures
A base-isolated building can have a small horizontal eccentricity between the center of mass of the superstructure and the center of rigidity of the supporting bearings. The structure...
State-of-the-Art of Development of Floor Spectra
Floor spectra are used as seismic inputs for the design and qualification of subsystems and equipment. Until very recently, the time history analyses with single acceleration time history...
A Correlation Study on the Spectrum Decomposition Method
The major elements of the Spectrum Decomposition Method (SDM) are reviewed together with its automated process for generation of in-equipment response spectra (IERS). The floor required...
Transient Fluid-Structure Interaction of a Cylindrical Tank with a Flexible Baseplate
Analytically predicted coupled natural frequencies, response functions, and transient responses are compared with measured values for a partially filled cylindrical tank subject to excitation...
Pipeline Hydraulic Transient and Leak Detection Analysis
Liquid and gas pipelines cannot be properly designed with consideration of steady flow analysis techniques alone due to the possibility of pipeline failure resulting from uncontrolled...
Coping with High and Low Pressures of Transient Flow
Conditions exist in most long distance water pipelines, such that abnormal but inevitable occurrences will cause transient flow. Often the most crucial conditions for consideration by...
Stability of Method of Characteristics
For the analysis of waterhammer, the first-order accurate method of characteristics (MOC) has been widely used for which Courant condition for stability has been developed neglecting the...
Structural Steel Details: Is Responsibility a Problem?
Because structural engineers are leaving design of structural steel connections to fabricators, the problem of responsibility for those details has arisen. This article explores a variety...
Directional Wave Spectra Applications
These collected papers and their ensuing discussions presented at the September, 1981 symposium at the University of California on directional wave spectra applications examine the present...
Steel Structures Provide Flexibility
The steel structures of several major buildings are evaluated by the structural engineers responsible for the design and construction. Included are the Park Avenue Atrium in New York;...
Big Thompson Flood Exposes Need for Better Flood Reaction System to Save Lives
The actions people took in response to warnings of disaster in the Big Thompson flood of 1976 affected their chances for survival. No one who climbed the side of the canyon was killed...
Germany, Belgium and Los Angeles have Mandatory Design Review for Major Structures
The report of the engineering investigation into the causes of the collapse of the Hartford Coliseum space truss cited design deficiencies as the cause of failure. That report also says...
A Comparative Study of Structural Response to Explosion-Induced Ground Motions
The report provides detailed information about the responses of actual structures to loads, both static and dynamics, which can be expected to occur during their service life. The characteristics...
Structural Plastics
Properties and Possibilities
Proceedings of a Symposium at the National Structural Engineering Meeting held in Louisville, Kentucky, 1969. Sponsored by the Committee on Plastics of the Structural Division of the American...
Return to search